The JYYJ-H600 is an entry-level hydraulic polyurethane spray machine that gives you professional-grade 36 MPa pressure for spray foam insulation and polyurea coating. Its hydraulic drive delivers stable output where pneumatic machines top out, making it the gateway into industrial-grade spraying.
Specifications
| Drive type | Hydraulic |
| Max output | 2–12 kg/min |
| Max working pressure | 36 MPa |
| Hydraulic system pressure | 6–18 MPa |
| Mixing ratio | 1:1 (fixed) |
| Voltage | 380V 3-phase 50Hz |
| Heating power | 26 kW / 22 kW |
| Net weight | ~356 kg |
Applications
- Commercial and industrial insulation
- Cold storage and warehouse refrigeration
- Pipeline waterproofing
- Light polyurea coating
- High-density closed-cell foam
Key Advantages
- 36 MPa hydraulic pressure vs ~25 MPa pneumatic ceiling
- Air-cooled motor and pump for sustained heavy-duty work
- Handles both PU foam and polyurea
- Heated hose keeps chemical viscosity to the gun
- Heavy-duty mobile base with industrial casters
See the full range on our PU spray foam machine page.
FAQ
What pressure and output does the JYYJ-H600 reach?
Up to 36 MPa working pressure and 2–12 kg/min output, driven hydraulically for stable performance in industrial insulation and coating.
Can it spray both foam and polyurea?
Yes. The H600 handles rigid PU foam insulation and light polyurea coating with a heated hose to maintain material viscosity.
Do you supply the raw material?
No — we supply the machine only; you run it with your own or sourced polyol, isocyanate or polyurea system.
Request a quote and full specification for the JYYJ-H600.
Technical Parameters of JYYJ-H600
| Item | JYYJ-H600 |
|---|---|
| Drive Type | Hydraulic |
| Max Output | 2-12 kg/min |
| Max Working Pressure | 36 MPa |
| Hydraulic System Pressure | 6-18 MPa |
| Mixing Ratio | 1:1 (Fixed) |
| PLC Control | No |
| Voltage | 380V 3-phase 4-wire 50Hz |
| Heating Power | 26 kW / 22 kW |
| Air Source | 0.5-0.8 MPa ≥ 0.5 m³/min |
| Heat Hose | 15 m / set |
| Net Weight | ~356 kg |
| Applicable Materials | PU foam + polyurea |
Specifications are subject to continuous improvement. Tell us your substrate, output and site conditions and we will confirm the exact configuration.