PU cornice refer to lines made of PU synthetic materials. PU is the abbreviation of Polyurethane, and the Chinese name is polyurethane for short. It is made of hard pu foam. This kind of hard pu foam is mixed with two components at a high speed in the pouring machine, and then enters the mold to form a hard skin. At the same time, it adopts fluorine-free formula and is not chemically controversial. It is an environmentally friendly decorative product in the new century. Simply modify the formula to obtain different physical properties such as density, elasticity, and rigidity.
Our PU mould advantages:
1)ISO 9001, IATF 16949 and ISO 14001 certified enterprise, ERP management system
2)Over 16 years of mould manufacturing experience
3)Stable technical team and frequent training system, middle management people are all working for over 10 year in our shop
4)Advanced matching equipment, CNC center from Sweden, Mirror EDM and JAPAN precision WIRECUT shots
Our one-stop PU mould service:
1)Mold design from your sample, drawing or 3D file, including gate and vent layout
2)CNC-machined aluminium moulds for PU foam, in open-pour or closed-mould configuration with clamping frame and locating pins 3) Temperature-controlled moulds with water or electric heating, plus vent and gate layout tuned for consistent skin quality and density 4) Trial foaming on our own high- and low-pressure PU machines before shipment, so the mould leaves with a proven shot weight and cycle time
Technical Parameters — PU Cornice Mould
| Item | Specification |
|---|---|
| Mold Material | Resin |
| Product Types | Cornice, Skirting, Ceiling Trim, Wall Panel, Relief |
| Profile Length | Custom (e.g. 500–3000 mm) |
| Dimensional Tolerance | ±0.2 – 0.5 mm |
| Surface Detail Accuracy | High-definition CNC / pattern replication |
| Surface Finish Options | Smooth / Wood grain / Stone texture / Custom |
| Typical Cycle Time | 3 – 10 minutes (depends on size & PU system) |
| Mold Lifespan | 50,000 – 120,000 cycles (material dependent) |
Moulds are fully customised to your part. Send us your sample or drawing and we will confirm cavity layout, material and lead time.