Umarnin donPsayayyaPU Saddu'aInjin Kumfa

Polyurethane high-matsa lamba spraying kayan aiki za a iya amfani da: masana'antu tabbatarwa, roadbed waterproofing, karin cofferdam injiniya, ajiya tankuna, bututu coatings, siminti Layer kariya, rufin hana ruwa, ginshiki waterproofing, lalacewa-resistant rufi, waje bango rufi, sanyi ajiya rufi, Ana amfani da insulation na bututu, zubar da hasken rana, ginin rufin polyurethane, da dai sauransu. Ana amfani da injin feshin polyurethane da kamfanin ke samarwa a cikin feshin sanyi na ajiya, fesa bangon bango na waje, feshin karusar karusa, feshin tile na launi, rufin rufin da feshi, kumfa mai hasken rana. inji, insulation bokitin kumfa, rufin tankin ruwa kumfa, da kuma hana sata kofofi da tagogi.Cika, kumfa marufi na samfur, buffer da girgiza-shanye jerin samfuran kumfa duk sun cika bukatun gini na gida da na waje.

Abũbuwan amfãni na samfur na polyurethane high-matsi spraying kayan aiki:

1. Matsakaicin matsa lamba na aiki na kayan aikin fesa shine 10MPA, kuma shugaban baya kasa da mita 45;

2. Kayan aiki yana da tsarin dumama dumama na 2500W don tabbatar da mafi kyawun zafin jiki don haɗuwa da albarkatun kasa;

3. An haɗa kayan haɗin gwiwar polyurethane a babban matsa lamba a kan bindiga.Haɗin yana da sauri kuma har ma.An saki matsa lamba kuma atomization yana da kyau.Ana iya sarrafa farfajiyar fesa don canzawa kusa da 3mm;

4. An sanye da kayan aiki tare da famfo mai ɗaga kayan aiki ta atomatik azaman ma'auni, wanda ke fitar da albarkatun ƙasa ta atomatik kuma yana adana ɗan adam;

5. Kayan aiki ya zo daidaitattun tare da Grass 5th ƙarni na musamman na fesa gun.Biyu juzu'i na karfe sun maye gurbin nau'in juzu'in filastik na bindigar feshi na ƙarni na 3, wanda ya fi dorewa.Ginin bututun ƙarfe gabaɗaya yana guje wa karyewar bututun ƙarfe na ƙarni na 3 akai-akai.

Polyurethane spraying yi tsari

Kafin a yi gyaran gyare-gyaren gyare-gyare na polyurethane, ana buƙatar jiyya na tushe da kuma fesa firam, sannan kuma a yi aikin ginin polyurethane.

1. Processing na asali dubawa

Ganuwar tushe yana buƙatar biyan buƙatun, tsayin daka yana cikin 10mm kuma shimfidar bangon yana buƙatar zama 5-8mm.Ya kamata a kiyaye ganuwar da tsabta da tsabta, ba tare da lanƙwasa ko ƙura ba, da dai sauransu.

2. Hoist transverse da na roba kula Lines

Idan babban gini ne, kuna buƙatar amfani da theodolite don rataye waya.Idan gini ne mai hawa biyu, kuna buƙatar babban abin lanƙwasa waya don rataya siririyar waya mai rataye da waya.Yi amfani da sandunan faɗaɗa a ƙarƙashin bangon saman da bangon ƙasa don zama babban bango.wuraren rataye waya.

3. Fesa m kumfa polyurethane

Yi amfani da feshin polyurethane don fesa kumfa polyurethane mai tsauri akan bangon bango.Dole ne aikace-aikacen ya kasance daidai.Lokacin fesa, fara daga gefen, sannan jira don kumfa, sa'an nan kuma fesa ta gefen blister.Kula da kauri bukatun lokacin fesa kuma dole ne bi kauri bayani dalla-dalla.Yawanci, kauri ya kamata ya zama kusan 10mm yayin fasin farko na spraying.A cikin gashi na biyu na spraying, kauri ya kamata ya kasance tsakanin 15mm.

4. Aiwatar da turmi zuwa dubawa

Sa'o'i hudu bayan an fesa Layer tushe na polyurethane, ana iya amfani da turmi na polyurethane.Kuna buƙatar yin amfani da abin nadi don yin amfani da turmi na polyurethane daidai a saman Layer na tushe na polyurethane.Bayan an gama spraying, kuna buƙatar jira awanni goma sha biyu zuwa ashirin da huɗu kafin a fara aiki na gaba.

5. Gina rigar turmi mai hana fasa bututu da fuskar fuska

1) Ƙarshen fenti

2) A wannan lokacin, wajibi ne a yi amfani da turmi mai hana fashewa da kuma shimfiɗa rigar raga.Bayan an yi amfani da turmi na hana fasa, ana buƙatar a duba shi don ganin ko an shimfiɗa shi da kyau da kuma ko kusurwar yin da na yang suna murabba'i ne.Duk wani wuraren da ba daidai ba yana buƙatar cikawa kuma a gyara shi da turmi.Sa'an nan, bayan yin aikin da ya gabata, yi amfani da fenti na ƙarewa.Jira har sai turmi anti-crack ya bushe, sa'an nan kuma shafa shi.A wannan lokacin, ya kamata ku kuma kula da santsi.

3) Fuskantar tubali

4) Wannan mataki yana buƙatar kwanciya welded galvanized hot- tsoma raga.Bayan rufin rufin ya wuce gwajin karɓuwa, yi amfani da turmi mai hana fasa-kwauri sau da yawa, sannan a shimfiɗa ragar welded ɗin galvanized.Bayan an shimfiɗa ragar welded, shima yana buƙatar yin gwajin da ya dace.Bayan an ci jarrabawar, ana buƙatar amfani da turmi mai hana fashewa.

5) Bulogin veneer

6) Bayan an kammala matakan da suka gabata na ayyukan gine-gine, za ku iya shirya tubalin da ke fuskantar a wannan lokacin.Kaurin turmi na tubalin da ke fuskantar ya fi dacewa tsakanin 3mm-5mm.